Hengsen DDF-G series Motorised Valve

ODM/OEM Service

High Capacity

Low Noise

1 Year After-sale Service

What does DDF-G do?

DDF-G series motorized valve are available for controlling the central air conditioning and heating system's opening and closing to control the room temperature. The control valve is driven by the unidirectional hysteresis synchronous motor and adopts spring reset. The actuator is normally closed when it doesn't work. If it needs to work, the thermostat will provide a signal of opening, and then the actuator will get the power to work. Opening the valve, the cold and hot water will come into the fan coil to provide the cold or hot air. When the set temperature is achieved,

the thermostat will cut off the electric thermal valve's power, and then the reset spring can close the valve to stop the water flow into the coil. So the room temperature is always maintained within the set range by thevalve's opening and closing. DDF-G series motorzed valve actuator and valve is connected by thread. Actuator should be installed after the valve. The installation is

very convenient. Actuator installation should be close to the wall to save space. This product has high durability andsmall noise, and can be used in the secluded fan coil which is always has high temperature and humidity.


Product Features

◆ Body material: forged brass

◆ Stem material: stainless steel06Cr19Ni10

◆ Sealing material: nitrile rubber (NBR)

◆ Working medium:cold/hot water

◆ Fluid temperature:2-94℃

◆ Pressure:1.6MPa

◆ Ambient temperature:0-65 C℃ maximum relative humidity is no dew

◆ Travel time:11~15 seconds

◆ Motor torque: >800gf.cm

Product Features

●Motorized valve body series:DDF

●Valve body code:G=high pressure motorized valve

●Valve type:2=2-way valve,3=3-way valve

●DN:15=DN15,20=DN20,25=DN25

●Motorized valve actuator series:DFQ

●Actuator code:JA1=2-wire,JA2=5-wire,JA3=2-wire aluminum alloy shell,JAL1=2-wire economic      type

Input power:220=220VAC,110=110VAC,24AC=24VAC

product-image