DBF-L Seriyası Alüminium Manifold
Yüksək Davamlılıq/Aydın və dəqiq rəqəmlər/Yüksək Rahatlıq və Praktiklik
(PDF)DownloadPDF
Asan quraşdırılması
Aşağı səs
The reaction speed is fast and the room temperature can be adjusted quickly
With spring reset function, high safety
DDF-X seriyalı motorlu vana otaq kondisionerinə nəzarət etmək üçün mərkəzi kondisionerin və su isitmə sisteminin açılması və bağlanmasına nəzarət etmək üçün mövcuddur.
◆ Bədən materialı: saxta pirinç
◆ Kök material: paslanmayan polad
Aling Sızdırmazlıq materialı: nitril kauçuk (NBR)
◆ İşləmə mühiti: soyuq/isti su
◆ Fluid temperature: 2-94℃
◆ Pressure: 1.6MPa
◆ Ambient temperature: 0-65 C℃ maximum relative humidity is no dew
◆ Travel time: 11～15 seconds
◆ Motor torku:> 800gf.cm
◆ The control valve depends on the paraffin wax propeller drive the spring to reset.The actuator is normally closed when it doesn't work.If it needs to work, the thermostat will provide a signal of opening, then the actuator will gets the power to work. Opening the valve, the cold and hot water will come into the fan coil to provide the cold or hot air. When the set temperature is achieved, the thermostat will cut off the actuator 's power, then the reset spring can close the valve to stop the water which flow into the coil. So the room temperature is always maintained within the set range by the valve's opening and closing. The actuator and valve is connected by clamp connection way. Actuator should be installed after the valve. The installation is very convenient. Actuator installation can be close to the wall to save space. This product is durable and reliable.The operating noise is very low.
