Hengsen WKQ-B01 Series Digital Thermostat


ເໝາະ ສຳ ລັບເຮືອນ, ຫ້ອງການແລະລະບົບອຸດສາຫະ ກຳ



WKQ-B01 ເຮັດຫຍັງແດ່?

WKQ-B01 proportional integral thermostat is used in the central air-conditioneing, heating and cooling system. When the temperature sensor detect the change of the controlled environment, the thermostat will generate an increasing or decreasing signal to adjust reversible motor actuator.


◆ External with NTC thermistor temperature sensor.

◆Snap-on dial scale shade to avoid people changes the data without permission.

◆ Changeable output function:DA or RA(summer or winter)---through inner switch or remote

   concentrate switch.

◆ Adjustable proportional band.

◆ Backup set data

◆ Flexible installation: wall installation,embedded,embedded plate installation or concealed               installation in the terminal equipment of fan coil etc.


◆ WKQ-B01-A:Temperature control range:0~40 C

◆ WKQ-B01-B:Temperature control range:3~120 C

Effect :Proportional + Integral,positive and negative

Supply votage:24VAC±10% 50/60Hz

Output signal :24VAC(0.5A)Through the TRIAC

Power consumption: 2W(No load)

Proportional band: 1-7℃, adjustable, factory setting is about 4℃

Integral time: 2-62seconds,adjustable

Temperature Setting range : 0-40 C or 30-120 C

External NTC thermistor temperature sensor: NTC-10K 1% thermistor

Wire :Combined terminal/1.5mm

Cover :(Thermal-resistance type & Auxiliary fire-resistant type) ABS,beige

Working environment :0~+50℃ 10~90%RH no dew

Storage Temp:-40~+70 C

ນໍ້າ ໜັກ ສຸດທິ: 120g

Accessory(extra order):CGQ-W9000 temperature sensor

ຜະລິດຕະພັນ - ຮູບພາບ